Futon Chair Bed Frame Ideas
Futon chair bed provides a place to sit as well as a place to lay down and rest. They look like futon sofas, but are meant for one person. Lay to 30-inch boards on the edge, parallel and 28 inches apart. Ideas for futon chair bed frame lay four 32-inch boards flat across the 30-inch boards so that they are perpendicular. Space the boards 4½ inches apart, starting two inches from the ends of the 30-inch boards. There should be a 1/2-inch overhang from both ends of the 32-inch boards to the sides of the 30-inch boards. Screw four screws through each 32-inch table and into 30-inch boards. This is the middle piece for your futon chair – the part your back will rest against.
Lay to 30-inch boards on the edge, parallel and 25 inches apart. Lay four 32-inches across them, just like you did in the previous step. This time there should be a 2-inch overhang from the ends of the 32-inch boards to the sides of the 30-inch boards. Screw 32-inch boards into 30-inch boards in the same way as the previous step. It’s back for your futon chair.
Lay the two 20-inch boards at the edge, parallel and at a distance of 25 inches apart. Place the last two 32 inch boards perpendicular to them as you did in the previous step and screw them down. It is the seat part of your futon chair.